Grass Valley Personal Locator System CameraMan - Manual (Page 12)

Page 9 Appendices
Maximum pan/tilt travel
Once the CameraMan Camera is installed, maximum PAN/TILT settings can be configured to
suit the application. The CameraMan Camera has a pan range of 359°,
but comes programmed with factory default settings, as illustrated, of ± 90° of PAN and ± 25°
of TILT. If desired, use the following procedure to change the maximum position settings:
Using the Chairperson Locator Keypad:
1. Press and hold the UNLOCK button.
2. While holding the UNLOCK button, use the Pan/Tilt arrows to move the camera to
the maximum desired position.
3. Release the UNLOCK button to set the maximum position for that direction.
4. Listen for two beeps.
5. If desired, repeat steps 1-4 to until all maximum positions (left, right, up and down)
are set.
Specifications
Chairperson and Personal Locator Keypads
RF Range . . . . . . . . . . . . . . .60 ft. from Camera (typical)
Power . . . . . . . . . . . . . . . . .2 N cell batteries
Dimensions . . . . . . . . . . . . . .4.7” L x 3.0” w x 1.9” H
180° Default Pan Settings
50° Default Tilt Settings
359° Maximum Pan Settings
Appendix A: Specifications