Appendix c: troubleshooting – Grass Valley Personal Locator System CameraMan User Manual
Page 14

Page 11
Appendices
Should you have any problems with your CameraMan Personal Locator Camera System, please refer to the following guide. After
referring to the guide, should you have any questions or problems, please contact your authorized reseller or Grass Valley
at (904) 596-3500.
TROUBLESHOOTING
Problem:
The CameraMan Camera’s Video is not working properly.
Solution:
1. Verify that the VIDEO SELECT switch on the back of the CameraMan
Camera is set properly. (see page 7 of the General Pan/Tilt Operations
Manual)
2. Verify that the appropriate video connection is being used on the back
of the CameraMan Camera, either S-VIDEO or COMPOSITE VIDEO
OUT. (see page 10 of the General Pan/ Tilt Camera Operations
Manual)
3. Verify that there is a solid connection between the Video Cable to both
the CameraMan Camera and the destination.
Problem:
The Locator Keypad will not control the camera.
Solution:
1. If the LOCK light on the front of the CameraMan Camera is ON, press
the UNLOCK button on the Chairperson Locator Keypad.
2. Verify that the BASE UNIT ADDRESS switch on the back of the camera
is set identical to the BASE UNIT ADDRESS switch in the battery
compartment of the keypad.
3. Verify that the RF switch on the back of the base unit is in the ENABLE
position.
4. Try new batteries in the Locator Keypad
Appendix C: Troubleshooting
Configuration Panel on back of CameraMan
Lock Button
Base Unit
Address Rotary
Switch