Appendix h: on-screen camera menus, Page 23, Setup procedures (output signal selection) – Grass Valley 3-CCD ANALOG CameraMan Rev.D1 User Manual
Page 26: Main menu screen, Ccd analog camera, Hs e

3-CCD ANALOG Camera
Page 23
Appendix H: On-Screen Camera Menus
● MAIN MENU SCREEN
**Halogen Mode Set**
Brightness Set
Color Set
G/L. Color Bar Set
Sharpness Set
Other Set
Option Card Set
Initialize Data
End
Use Mode
Blinking
Main Menu of Halogen,
Fluorescent, Outdoor Mode
A convertible camera, for example, AW-E300, can be
set using the menu as suited to the system and shoot-
ing conditions. For details, refer to the operation manu-
al for the camera.
■ Setup Procedures (Output Signal
Selection)
(1) Display the main menu.
Camera alone: Keep the menu switch depressed
for 5 seconds or more.
With RCU (RCB): Set the user set switch in the
–
+
MENU
ITEM/AWC
YES/ABC
NO/BAR
OPTION CARD
VIDEO OUT
I/F REMOTE
G/L IN
IRIS
DC12V IN
MENU Switchi ™ j
ITEM/AWC Switch
i ´ j
NO/BAR Switch
i | j
YES/ABC Switch
i { j
PAGE
ITEM
UP
DOWN
COARSE
FINE
SC PHASE
270
°
180
°
90
°
0
°
H.PHASE
USER SET
OFF
ENC
VF
ON
User Set Switch
PAGE Switch
ITEM Switch
UP Switch
DOWN Switch
CAMERA
RCU (RCB)
(2) The setting item (flashing) changes each time the
menu switch, item switch, or NO switch is pressed.
Select [Option Card Set] and press the YES switch
to display the [Option Card Set] submenu.
(3) Select [Component] with the menu switch and item
switch, and select [R/G/B], [Y/Pr/Pb] or [Y/C] with
the YES and NO switches.
(4) Select [Return] with the menu switch and item
switch, and press the YES switch to return to the
main menu.
(5) The camera is now back in shooting condition.
Camera alone: Select [End] with the menu switch
and item switch, then press the YES switch.
With RCU (RCB): Set the user set switch in the
pocket to OFF.
The camera will now operate under the conditions
thus set.
**Option Card Set*
Component R/G/B
Return
Refer to the PVTV SHOT Director Installation and Operations Manual for instructions on how to access and use the on-screen menus
for output signal selection and other functionality.
h
s
e
VIDEO OUT
G/L IN
I/F REMOTE
OPTION CARD
IRIS
DC12V IN
MENU
ITEM/AWC
YES/ABC
NO/BAR
MENU
ITEM/AWC
YES/ABC
NO/BAR