Grass Valley 8949MDA-CFR v.2.6.0 - Manual (Page 49)

8949MDA-CFR/-SFR — Instruction Manual 49
Configuration Summary Table
Table 10 provides a complete summary of the module functions and a com-
parison of the functionality available with each control type along with the
ranges and default values for each parameter and notes on each control.
Table 10. Summary of Configuration Functions
Function
Type
Default
Range/Choices
Resolution
Web Page/
Function Name
Local Controls
Switches
S1 and S2
Newton
Control
Panel
Config mode Local&Remote
Local or
Local&Remote
Access to web pages can be
locked out by Local controls
S2: Pin 1
Off = Local Only
On = Local&Remote
N/A
Routing mode
(Up to three inputs depending on
type of fiber optic SFP device
installed.) Only one input can be
active at a time.
Coax In J9
Coax In J9,
Optic 1 (In), or
Optic 2 (In)
Settings/
Routing Mode
Coax In J9, Optic 1 (In), or
Optic 2 (In) radio button
S1: Pins 6 and 7
Input Select
Coax In: 0 0
Optic 1: 0 1, or
Optic 2: 1 0
Rout Mode
Optic outputs enable
(Up to two outputs depending on
type of fiber optic SFP device
installed.) All fiber outputs can be
active at the same time.
Disable Disable or Enable
Settings/
Optic Outputs pulldown
S2: Pin 4
Off = Disabled
On = Enabled
Optic Out
Input reporting enable Enable Disable or Enable
Settings/
Input Reporting pulldown
N/A N/A
Input Format selection Auto
Auto,
1080i/50,
1080i/5994
720p/50,
720p/59.94,
480i/59.94, or
576i/50
Settings/
Input Standard Selection
pulldown
S1: Pins 2, 3, 4,5
Auto: 0 0 0 0
1080i/50: 0 0 0 1
1080i/59.94: 0 0 1 0
720p/50: 0 0 1 1
720p/59.94: 0 1 0 0
480i/59.94: 0 1 0 1
576i/50: 0 1 1 0
N/A
Composite Color Bars test signal
(8949MDA-CFR only)
Disable Enable or Disable
Settings/
Composite Color Bar
pulldown
N/A ColorBar
Composite Setup
(8949MDA-CFR only)
Setup Setup or No Setup
Settings/
Composite Setup pulldown
S1: Pin 8
Off = No Setup
On = Setup
CompSetup