Grass Valley 8949MDA-CFR v.2.6.0 - Manual (Page 13)

8949MDA-CFR/-SFR — Instruction Manual 13
Installation
Local Configuration
If you do not have an 8900NET module in the GeckoFlex frame for remote
monitoring and configuration, you will need to configure the module using
the local onboard controls before installing the front module.
Local configuration of the 8949MDA-CFR and 8949MDA-SFR consists of
two DIP switches (S1 and S2) outlined in the lower left corner of
Figure 2 .
Refer to Table 1 on page 14 for setting S1 and S2. A summary of Local and
Remote (web page and Newton Control Panel) parameters is provided in
Table 10 on page 49 .
Figure 2. Configuration Switches on 8949MDA Module
See Table 1 on page 14