Grass Valley 8949MDA-CFR v.2.6.0 - Manual (Page 18)

18 8949MDA-CFR/-SFR — Instruction Manual
Installation
To install the fiber optic SFP device:
1. Slide the fiber optic device into the metal fiber cage with the label and
handle to the right.
2. Push the device in as far as it will go without forcing it. It will not go
completely into the cage.
3. Cable the fiber optic connectors according to the instructions given in
8949MDA-CFR Module Cabling on page 20 or 8949MDA-SFR Module
Cabling on page 21 depending on the type of SFP device used.
Figure 5. Installing Fiber Optics SFP Device
To extract the fiber optic SFP device follow the steps below:
1. Remove the fiber cable first.
2. Unlock the module by flipping the handle to the left.
3. Remove the fiber optic SFP device by using its handle.
FIBER
J7
J9
J8
8431_03
r3
Label
Handle
Arrow Indicators:
Fiber Optic Receiver
Fiber Optic Transmitter
Fiber Optic Transceiver