Grass Valley 8949MDA-CFR v.2.6.0 - Manual (Page 43)

8949MDA-CFR/-SFR — Instruction Manual 43
Specifications
Specifications
Table 6. 8949MDA-CFR and 8949MDA-SFR Specifications
Parameter Value
Coax Input
Number and type of inputs 1 BNC
Input impedance 75 Ohm
Input signal type Serial digital component conforming to the following formats:
• SMPTE 292M for 1080i/50, 1080i/59.94, 720p/50 and 720p/59.94
• SMPTE 259M (270 Mb/s)
Signal level SDI 800 mV p-p ±10% max
Return loss >15 dB 0.004 to 1.50 GHz
Auto equalization • HD signals up to 125m of Belden 1694A
• SD signals up to 330m of Belden 1694A
Tolerated input jitter Compliant with the SMPTE 259M (270 Mb/s) and SMPTE 292M stan-
dards
DA Coax Outputs
Number and type of outputs 4 BNCs
Output impedance 75 Ohm
Signal type Serial digital component conforming to the following formats:
• 1080i/50, 1080i/59.94, 720p/50 and 720p/59.94
• SMPTE 259M (270 Mb/s)
Signal level SDI 800 mV p-p ±10%
Return loss • >15 dB 4 to 270 MHz
• >13 dB 0.27 to 1.50 GHz
Output jitter For input with < 0.1 UI jitter, the output jitter complies with the SMPTE
292M and SMPTE 259M standards
Downscaled Serial Outputs (8949MDA-SFR Module)
Number and type of outputs 4 BNCs
Signal type Conforming to the SMPTE 259M standard
SDI level 800 mV±10%
Return loss > 15 dB
Output jitter Conforming to the SMPTE 259M standard
Downscaler delay < 0.95 ms
Downscaler output 9 bits representation
Embedded audio and HANC passed to output SD SDI only
Downscaled Composite Outputs (8949MDA-CFR Module)
Number and type of outputs 4 BNCs
Signal type Conforming to the SMPTE 170M standard for NTSC and CCIR624 for
PAL-B
Return loss > 40 dB, 0 to 10 MHz
Output impedance 75 Ohm
Downscaler delay < 0.97 ms
Downscaler output 9 bits representation