Status web page – Grass Valley 8949MDA-CFR v.2.6.0 User Manual
Page 28
28
8949MDA-CFR/-SFR — Instruction Manual
Remote Configuration
Status Web Page
Use
this
link
The Status web page for 8949MDA-CFR for the 8949MDA-SFR) shows the
signal status of the input signal(s) and communication with the frame bus.
The Status page appearance will depend on the presence and type of fiber
optic SFP device installed.
Use the Status web page example applicable to your configuration from the
list below (the -CFR and -SFR are identical):
•
8949MDA-CFR/SFR without SFP device:
•
8949MDA-CFR/SFR with Dual Receiver SFP device:
•
8949MDA-CFR/SFR with Dual Transmitter SFP device:
•
8949MDA-CFR/SFR with Dual Transceiver SFP device:
Color coding of the display indicates the signal status. Refer to
for an explanation of the color coding.
•
Under the
Status
title are given the model, the description and the frame
location. Below, the graphic shows the input and output signals. If the
status of either input or output changes, it will be reflected in the color
status of the arrow (linked to the
Input Reporting
parameter) and the
status LED on the module web page.
•
The presence and the type of
Optic Device
installed will be reported in the
double bars area below the graphic depending on the fiber optic SFP
device installed.
Other module warning messages from the module will also appear in
this area. If no SFP device is installed, it will report
Optic Device: MISSING
.
Note
Some modules may display a part number on the Status web page that is dif-
ferent from the one printed on the module circuit board. These part numbers
are completely compatible.
•
Information about the module, such as Part Number, Serial Number,
Hardware Revision, Firmware Revision 1 (CPLD), Firmware Revision
2 (FPGA), Software Version, and Asset Tag number are given in a prop-
erties section at the bottom of the Status Web Page.