Module links and displays – Grass Valley 8920DMX User Manual
Page 17
8920DMX Instruction Manual
17
Configuration
The 8900 modules can be addressed by clicking on a specific module icon
in the frame status display or on a module name or slot number in the link
list on the left.
Use the
Refresh
button to update the display (available with 8900NET soft-
ware version 3.0 and later).
The
Online Manual Link
button can be set up to link to the documentation in
pdf format. Link configuration is done on the Frame Configuration page.
For information on status and fault monitoring and reporting shown on the
Status page, refer to
Module Links and Displays
The 8900 GUI provides the following links and displays for the 8920DMX
module (refer to
):
•
Status – reports module operational status and properties (part and
version numbers),
•
Signal configuration displays for setting up module parameters,
•
Slot Config – module configuration information (location and user
assigned names), and
•
Software Update – allows software download via the 8900NET module
when available.
Note
Refer to the latest Release Notes for this module on the Grass Valley website
at http://www.thomsongrassvalley.com for complete details on updating
software.
The Status, Slot Config, and Software Update displays are described in
detail in the 8900NET manual. Some functions listed may not be supported
by a particular module. These will be indicated as not supported.
in the next section for complete details
on setting the module parameters.
Figure 7. 8920MUX Module Configuration Display Links
Software Update Display
Signal Configuration Displays
Status Display
Slot Configuration Display