Grass Valley 8920DMX - Manual (Page 16)

16 8920DMX Instruction Manual
Configuration
Remote Configuration and Monitoring
8920DMX configuration and monitoring can be performed remotely using
the 8900NET interface in 8900TF or TFN frames (see
Figure 6 ). This section
describes the GUI access to the module configuration functions. Refer to
the
8900NET Network Interface Module Instruction Manual for information on
setting up and operating the 8900 frame network.
For remote access, make sure the jumper block on the module is set for both
Local and Remote access (
Figure 5 on page 14 ).
Note The physical appearance of the menu displays shown in this manual repre-
sent the use of a particular platform, browser and version of 8900NET
module software. They are provided for reference only. Displays will differ
depending on the type of platform and browser you are using and the version
of the 8900NET software installed in your system.
Figure 6. 8900NET GUI
8038_08
The Links section lists the frame and its current modules. The selected link's Status
page is first displayed and the sub-list of links for the selection is opened. The sub-list
allows you to select a particular information page for the selected device.
Content display section displays the information page
for the selected frame or module (frame slot icons are also
active links).
Online Manual Link
Refresh button for manual
update of page