Grass Valley 2090MDC - Manual (Page 9)

2090MDC Instruction Manual 3
Installation
Figure 2. Installing Passive Rear Module
2. Verify that the module connector seats properly against the midplane.
3. Secure the module to the rear of the frame with the two screw locks on
either side of the back panel using a crossblade screwdriver.
Figure 3. Installing Front Media Module
4. With the component side up, insert the front media module in the
corresponding front slot (see
Figure 3 ).
5. Verify that the module connector seats properly against the midplane
and rear module connector.
6. Press firmly on both ejector tabs to seat the module.
Alignment post
and receptacle Screw lock
(both sides)
8024_05r1
2000 frame (rear view)
2090MDC Passive Rear Module
Board edge guides
(both sides)
J10 J9 J8 J7 J6 J5 J4 J3 J2 J1
R B G Comp2 Comp1 SD Out2 SD Out1 HD Out2 HD Out1 HD In 2090MDC
2000
Alignment post and receptacle
8023-06
2000 Frame (front view)
Board edge
guides Board edge
guides