Module configuration displays, Software update displays, Signal configuration displays – Grass Valley 2090MDC User Manual
Page 19

2090MDC Instruction Manual
13
Configuration
The 2090MDC will indicate a SMPTE Alarm fault on the Frame Status
display for the following alarms:
■
Internal fault,
■
Configuration fault, or
■
Data error.
Module Configuration Displays
The 2000 GUI provides the following links and displays for the 2090MDC
module (
■
Module Configuration displays showing status and slot configuration
information (location and user assigned names),
■
Signal Configuration displays, and
■
Software Update display.
The Module Configuration displays are the same for all remote controllable
2000 modules. Refer to the 2000NET manual for more information on these
displays. Some functions listed may not be supported by a particular
module. These will be indicated as not supported.
Figure 9. 2090MDC Display Links
Software Update Displays
The Software Update display allows you to download new software ver-
sions for the module. Refer to the 2000NET manual and the Grass Valley
Group web site at http://www.grassvalleygroup.com for complete details
and new software versions.
Signal Configuration Displays
This section discusses the Signal Configuration Displays available to set
and monitor the 2090MDC module parameters remotely.
Module Configuration
Displays
Software Update
Display
Signal Configuration
Display