Grass Valley 2090MDC - Manual (Page 8)

2 2090MDC Instruction Manual
2090MDC HDTV Monitoring Downconverter
Installation
Installation of the 2090MDC module is a process of:
■ Placing the passive rear module in a frame slot,
■ Placing the front media module in the corresponding rear slot, and
■ Cabling signal ports.
The 2090MDC module can be plugged in and removed from a 2000 Series
frame with power on. When power is applied to the module, LED indica-
tors reflect the initialization process (see
Power Up on page 5 ).
Module Placement in the 2000 Frame
There are twelve cell locations in the 3 RU frame to accommodate either
analog or digital modules. The 2090MDC consists of a two module set con-
sisting of a front media module and a passive rear module. Each 2090MDC
media module plugs into the front of the 2000 frame mid-plane as illus-
trated in
Figure 1 . The passive rear module plugs into the corresponding
rear slot to provide the input and output interface connectors.
Figure 1. 2000 Series Frame, Front Slots
1. Install the passive rear module first by inserting it into any rear slot
(1 – 12) of the frame as illustrated in
Figure 2 .
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(1)
Front Media Modules
Slots 1-12
8029-04