Grass Valley 2090MDC - Manual (Page 20)

14 2090MDC Instruction Manual
2090MDC HDTV Monitoring Downconverter
Mode and Signal Standard
The Mode and Signal Standard display is shown in Figure 10 . After
selecting a mode, select the Apply button to activate it. The displays for
each mode will differ and are illustrated in this section.
Each display will report the following items for the current module status:
■ Input Standard (1080i, 1035i, 720p or No input),
■ Field Rate (50 Hz, 59.94 Hz, or 60 Hz), and
■ Output Standard (525 or 625).
This display provides controls for setting the following functions on the
2090MDC module:
■ Monitor output mode (Letterbox, Amorphous, Full Screen or Zoom).
Refer to
Monitor Output Display Modes Description on page 7 for details
on each mode.
■ Pedestal on and off for all modes (525 line rate only).
■ Horizontal Shift in Full Screen mode ( Figure 11 ).
■ Zoom factor (minimum letterbox to maximum full screen) and hori-
zontal shift in Zoom mode (
Figure 12 ).
Figure 10. Mode and Signal Standard Display
Use
This
Link
Set pedestal level of output
to On or Off (all modes).
Select mode of output monitor
to one of the following: