Grass Valley 2020ADC A-To-D - Manual (Page 25)

2020ADC — Instruction Manual 25
Configuration
User Settings
The USER SETTINGS menu allows you select the following parameters shown
in Figure 12 :
• GET FACTORY DEFAULT (Operation output mode to default, all audio levels
to 0 dB, and Monitor Audio Input mode to DISABLED ).
• Set MONITOR AUDIO INPUTS ( ENABLED or DISABLED ) to interact with the main
Status page to indicate the status of the audio inputs as shown below.
Figure 12. 2020ADC User Settings Display
Use
This
Link
Enables or disables
audio input monitoring
on main Status page
shown below.
Returns module setting
to factory default settings.
When disabled, Input Signal(s)
display is grayed out as shown
in this Status page example.
When enabled, Input Signal(s)
display will be green if both
signals are >-20 dBFS, yellow
if either of the input signals
are <-20 dBFS.