Grass Valley 2020ADC A-To-D - Manual (Page 14)

14 2020ADC — Instruction Manual
Power Up
Power Up
The front LED indicators and configuration switches are illustrated in
Figure 6 . Upon power-up, the green PWR LED should light and the yellow
CONF LED should illuminate for the duration of module initialization.
Operation Indicator LEDs
With factory default configuration and valid input and reference signals
connected, the green PWR LED and the green LOCK LED should be on.
Figure 6. Operation Indicator LEDs
8024_04
CH1 In > -20dBFS (green)
CH2 In > -20dBFS (green)
CH3 In > -20dBFS (green)
CH4 In > -20dBFS (green)
CH1 Clip (red)
CH3 Clip (red)
CH4 Clip (red)
CH2 Clip (red)
FAULT (red)
COMM (yellow)
CONF (yellow)
PWR (green)
REM OVER (yellow)
LOCK (green)