Grass Valley 2020ADC A-To-D - Manual (Page 24)

24 2020ADC — Instruction Manual
Configuration
Ch 3/4 Control and Status
The CH 3/4 CONTROL AND STATUS display ( Figure 11 ) provides controls for
setting the following parameters on Ch 3/Ch 4 output of the 2020ADC
module:
• Output mode, and
• Gain adjustment to set maximum signal level input to 0 dBFS digital
output.
The procedure for setting parameters on Ch 3/4 are the same as those for
Ch 1/2. Refer to
Ch 1/2 Control and Status on page 21 for a description of
setting these values.
Figure 11. 202ADC Ch 3/4 Control and Status Display
Use
This
Link
Indicates Ch 3 (left)
and Ch4 (right) digital
audio output level status
Select the output mode
for Ch 3/Ch 4
(See table in text)
Indicates Ch 3 (left)
and Ch 4 (right) digital
output clipping status
Indicates status of
input AES reference
Levels display in Numeric
Levels display in Sliders