Grass Valley 2020ADC A-To-D - Manual (Page 20)

20 2020ADC — Instruction Manual
Configuration
Module Configuration Displays
The 2000 GUI provides the following links and displays for the 2020ADC
module (
Figure 9 ):
• Module Configuration displays showing status and slot configuration
information (location and user assigned names), and
• Signal Configuration displays.
The Module Configuration displays operate in the same manner for all
remote controllable 2000 modules. Refer to the 2000NET manual for more
information on these displays. Some functions listed may not be supported
by a particular module. These will be indicated as not supported.
Figure 9. 2020ADC Display Links
Signal Configuration Displays
This section discusses the Signal Configuration Displays available to set
and monitor the 2020ADC module parameters remotely.
Software Update Display
Remote software updating is not supported on the 2020ADC module. Soft-
ware updating requires a cable assembly and kit available from Grass
Valley Customer Service (8900-FLOAD-CBL). Refer to the 2000NET
manual and the Thomson Grass Valley web site at
http://www.thomsongrassvalley.com for complete details.