Emerson NGA 2000 TO2 - Manual (Page 37)

Instruction Manual
760008-A
September 2001
Rosemount Analytical Inc. A Division of Emerson Process Management Operation 3-13
Model NGA 2000 TO2
3-5 EXPERT CONTROLS AND SETUP
The Expert Controls and Setup menus pro-
vide for the configuration of system and net-
work I/O (SIO & DIO), and for the
configuration of various functions on the TO2
analyzer module: To reach the analyzer setup
and controls menu , use the following se-
quence from the main menu:
Figure 3-15. Expert Controls and Setup
From the Main menu, move the cursor to the
“Analyzer and I/O, expert controls & setup…”
line and press the
↵ key. The menu will dis-
play as shown below.
Select the “Analyzer module control…” line
and press the
↵ key. The “Analyzer Module
Setup and Controls” menu will display as
shown.
Note: Both the “Analyzer Module Controls…”
and “Analyzer Module Setup…” lines activate
the “Analyzer Module Setup and Controls”
menu.
Note: Whenever the “Channel” tag appears
above the F3 key, pressing F3 will switch to
any other installed analyzer modules, one
after the other and eventually back to the
TO2 module. When activating any other in-
stalled module, the menus will be different
depending on that module. See each mod-
ule’s manual for a description of those
menus.
TO2 37.50 ppm
Measure Status… Channel Lock… MFG Data
-- Main Menu --
Analyzer basic controls (calibration) & setup…
Analyzer and I/O, expert controls & setup…
System configuration and diagnostics…
Display controls…
Time & Date: 06:34:05 February 01 2000
System tag: Fisher-Rosemount
TO2 37.50 ppm
Measure Channel Back…
-- Analyzer and I/O Expert Controls and Setup --
Analyzer module controls…
System & network I/O module controls….
Analyzer module setup…
System & network I/O module setup…
(Note: Controls & setup are identical for MLT/FID)
TO2 37.50 ppm
Measure Status… Back…
-- Analyzer Module Setup and Controls --
Calibration…
Alarms…
Ranges…
Linearization…
Measurement display configuration…
Concentration measurement…
Flow measurement…
Temperature requirements…