H3C Technologies H3C Intelligent Management Center - Manual (Page 74)

65
4. To return to the Device User list page, click Back.
Adding a device user
To add a device user:
1. Click the User tab.
2. On the navigation tree, select Device User > All Device Users.
The Device User list displays all device users.
3. Click Add.
4. Configure the following parameters:
{
Account Name—Enter a unique account name for the device user.
{
User Name—Enter the user name for the device user. The device user is identified by the user
name in TAM.
{
Password—Enter the login password.
{
Confirm Password—Confirm the password.
{
Device User Group—Click the Select User Group icon , expand the device user group list,
select a device user group, and then click OK.
{
Group Authorization Policy—This field is automatically populated after a device user group is
selected.
{
User Authorization Policy—Select a user authorization policy. Options are:
− CLI Access Not Supported—The device user can log in to the device but cannot execute
commands on the device.
− Specific authorization policy—The device user uses the selected authorization policy.
If this field is empty, the device user uses the authorization policy of the device user group.
{
Max. Online Users—Specify the maximum number of device users allowed to use the same
account name to log in to the device. If this parameter is blank, no limit applies to the number
of concurrent device users.
{
Expiration Date—Enter an expiration date in the format YYYY-MM-DD, or click the Calendar
icon to select one.
The device user cannot log in to the device from the expiration date on. If this field is empty, the
device user never expires.
{
Enable Privilege-Increase Password—Select this option to enable the privilege-increase
password function, and then specify the password.
To enable the privilege-increase password function, you must also permit execution of the
privilege increase command in the command set that is associated with the authorization
policy. For more information about the command set configuration, see " Command set ."
After this function is enabled, the device user can increase the user privilege to the highest level
by executing the privilege increase command, and then entering the password you specified
here. For information about the privilege increase command on the device, see the
configuration guide for the device.
{
Enable Password Strategy—Select Yes or No from the list. If Yes is selected, the requirements of
password strategy must be met when device users change a password. If No is selected, device
users are not controlled by the password strategy when they change a password. The password
strategy does not take effect when TAM operators set passwords for device users. For