H3C Technologies H3C Intelligent Management Center - Manual (Page 116)

107
4. Enter or select one or more of the following query criteria:
{
Account Name—Enter a partial or complete account name of the device user.
{
Result—Select an authentication result. Options are: Succeeded and Failed.
{
Authentication Time From/To—Enter an authentication time range for a device user, in the
format YYYY-MM-DD hh:mm.
Select an authentication time range.
− Click the Calendar icon on the left. On the upper part of the window that appears, select
the date, and on the lower part, enter the time. The date and time determine the start time
of the authentication time range.
− Click the Calendar icon on the right. On the upper part of the window that appears,
select the date, and on the lower part, enter the time. The date and time determine the end
time of the authentication time range.
If you only specify the start time, the authentication time range is from the start time to
9999-01-01 00:00.
If you only specify the end time, the authentication time range is from 2000-01-01 00:00
to the end time.
If you select both the start time and end time, the authentication time range is from the start
time to the end time.
{
Device User Group—Click the Select User Group icon . The Select Device User Group
window appears. Select a group and click OK. To clear your selection, click the Delete icon .
{
User Status—Select a user state. Options are:
− Normal—The user is in normal state.
− Cancelled—The user is already cancelled.
{
Device IP From/To—Enter an IP address range for the device. If you only enter the start IP
address, the range is from the start IP address to 255.255.255.255.
− If you only enter the end IP address, the range is from 0.0.0.0 to the end IP address.
− If you enter both the start IP address and end IP address, the range is from the start IP
address to the end IP address.
The end IP address must be no smaller than the start IP address.
You must enter a complete IPv4 address in each field.
{
User IP From/To—Enter an IP address range for the device user. If you only enter the start IP
address, the range is from the start IP address to 255.255.255.255.
− If you only enter the end IP address, the range is from 0.0.0.0 to the end IP address.
− If you enter both the start IP address and end IP address, the range is from the start IP
address to the end IP address.
The end IP address must be no smaller than the start IP address.
You must enter a complete IPv4 address in each field.
{
Privilege Level—Enter a privilege level for the device user. TAM queries authentication logs for
the specified level. For example, if a device user has a privilege level of 3, TAM records the
authentication logs for the device user as level-3 authentication logs.
{
Session ID—Enter the session ID used for packet exchanges between the device and TAM for
the authentication. TAM only supports exact matching for this field.
{
Action—Select an action for the authentication. Options are: