Viewing online user details – H3C Technologies H3C Intelligent Management Center User Manual
Page 110
101
{
Login Name—Enter a partial or complete login name.
{
Device IP Address Range From/To—Enter an IP address range for the device. You must enter a
complete IPv4 address in each field.
−
If you only enter the start IP address, the range is from the start IP address to
255.255.255.255.
−
If you only enter the end IP address, the range is from 0.0.0.0 to the end IP address.
−
If you enter both the start IP address and end IP address, the range is from the start IP
address to the end IP address.
The end IP address must be higher than the start IP address.
{
User IP Address Range From/To—Enter an IP address range for an online user. You must enter
a complete IPv4 address in each field.
−
If you only enter the start IP address, the range is from the start IP address to
255.255.255.255.
−
If you only enter the end IP address, the range is from 0.0.0.0 to the end IP address.
−
If you enter both the start IP address and end IP address, the range is from the start IP
address to the end IP address.
The end IP address must be higher than the start IP address.
{
Login Time From/To—Enter a login time range for an online user, in the format YYYY-MM-DD
hh:mm.
−
To select a login time range, click the Calendar icon on the left. On the upper part of the
window that appears, select the date, and on the lower part, enter the time. The date and
time determine the start time of the user login.
−
To select an end time, click the Calendar icon on the right. On the upper part of the
window that appears, select the date, and on the lower part, enter the time. The date and
time determine the end time of the user login.
If you only select the start time, the login time range is from the start time to 9999-01-01
00:00.
If you only select the end time, the login time range is from 2000-01-01 00:00 to the end
time.
If you select both the start time and end time, the login time range is from the start time to
the end time.
{
Terminal—Enter a partial or complete name of the terminal for an online user to log in to the
device. For example, when a user logs in to the device using Telnet, this field displays VTY 0
through VTY 15.
When a user logs in to the device through the console port, this field displays AUX 0, AUX 1,
and so on.
An empty field does not serve as a query criterion.
5.
Click Query.
The Online User list displays all online users matching the query criteria. To clear the query criteria,
click Reset. The Online User list displays all online users in TAM.
Viewing online user details
To view online user details: