Adding a sub-type, Modifying a device type or a sub-type – H3C Technologies H3C Intelligent Management Center User Manual
Page 47
38
3.
In the Device Type list area, click Add.
The Add Device Type page appears.
4.
Configure basic information about the device type:
{
Type Name—Enter a device type name, which must be unique in TAM.
{
Description—Enter a brief description of the device type.
The Parent Type Name field cannot be configured. It is automatically populated with the name of
the parent type for the device type. When the device area is the first level area that has no parent
area, this field displays two hyphens (--)..
5.
Click OK.
Adding a sub-type
You can add up to 256 device types (including sub-types) in TAM.
Before you add a sub-type for a device type, make sure the device type is not used by any device. If one
or more devices are using it, first change the device type.
To add a sub-type for a device type:
1.
Click the User tab.
2.
On the navigation tree, select Device User Policy > Authorization Conditions > Device Types.
The Device Type list displays all device types.
3.
Click the Add Device Sub-Type icon
for the device type to which you want to add a sub-type.
The Add Device Sub-Type page appears.
4.
Configure the sub-type information:
{
Type Name—Enter a device type name, which must be unique in TAM.
{
Description—Enter a brief description of the sub-type.
The Parent Type Name field cannot be configured. It is automatically populated with the name of
the parent device type for the sub-type.
5.
Click OK.
Modifying a device type or a sub-type
Before you modify a device type or sub-type, make sure it is not used by any device. If one or more
devices are using it, first change the device type or sub-type.
To modify a device type or a sub-type:
1.
Click the User tab.
2.
On the navigation tree, select Device User Policy > Authorization Conditions > Device Types.
The Device Type list displays all device types.
3.
Click the Modify icon
for the device type or sub-type you want to modify.
The Modify Device Type page appears.
You can modify all parameters except Parent Type Name. For more information about modifying
a device type or a sub-type, see "
."
4.
Click OK.