H3C Technologies H3C Intelligent Management Center - Manual (Page 126)

117
− Click the Calendar icon on the left. On the upper part of the window that appears, select
the date, and on the lower part, enter the time. The date and time determine the start time
of the audit time range.
− Click the Calendar icon on the right. On the upper part of the window that appears,
select the date, and on the lower part, enter the time. The date and time determine the end
time of the audit time range.
If you only specify the start time, the audit time range is from the start time to 9999-01-01
00:00.
If you only specify the end time, the audit time range is from 2000-01-01 00:00 to the end
time.
If you select both the start time and end time, the audit time range is from the start time to
the end time.
An empty field does not serve as a query criterion.
5. Click Query.
The Audit Log list displays all audit logs matching the query criteria. To clear the query criteria,
click Reset. The Audit Log list displays all audit logs.
Advanced query
To perform an advanced query:
1. Click the User tab.
2. On the navigation tree, select Device User > Log Management > Audit Logs.
The Audit Log list displays all audit logs.
3. On the upper-right side of the Query Audit Logs area, click the Advanced Query link.
You can perform an advanced query if you see Basic Query on the upper-right side of the Query
Audit Logs area.
4. Enter or select one or more of the following query criteria:
{
Account Name—Enter a partial or complete account name of the device user.
{
Audit Type—Select an audit type from the list. Options are:
− Start
− Update
− End
− Enter Command At CLI
− Clear Online Data
− Age Online Data
{
Audit Time From/To—Enter an audit time range for a device user, in the format YYYY-MM-DD
hh:mm.
Select an audit time range.
− Click the Calendar icon on the left. On the upper part of the window that appears, select
the date, and on the lower part, enter the time. The date and time determine the start time
of the audit time range.
− Click the Calendar icon on the right. On the upper part of the window that appears,
select the date, and on the lower part, enter the time. The date and time determine the end
time of the audit time range.