H3C Technologies H3C Intelligent Management Center - Manual (Page 72)

63
b. Click the System Config link.
The System Config page appears.
c. Click the Configure icon for System Parameters, and type 80 as
the in the IMC Service Port field, as shown in Figure 32 .
d. Click OK.
Figure 32 Changing the IMC service port number
The popup dialog boxes closed automatically while I telneted to a
device. What shall I do?
Since telnet commands are executed locally, they may be affected by the
local OS security settings. You need to restore the default settings of IE or
Firefox. For detailed operation, see the IMC Platform Help.
How can I change the login password of the super administrator
admin?
Log in to the IMC system as super administrator admin and perform the
following operations:
1. Click the System tab.
2. In the Operator Management navigation tree, select Modify Password.
3. Type the old password, new password, and confirm the new password.
4. Click OK.
How can I enable the verify code function for the IMC login?
By default, the verify code function is disabled for IMC login.