H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 15)

4-5
Configuring PAP Authentication
Configuring the authenticator
Follow these steps to configure the authenticator:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface view
interface interface-type
interface-number
—
Configure the local device to
authenticate the peer using PAP ppp authentication-mode pap
[ [ call-in ] domain isp-name ]
Required
By default, PPP authentication is
not performed.
Quit to system view quit —
Create a local user account local-user username
Required
This command also leads you to
local user view.
Configure a password for the local
user password { cipher | simple }
password
Required
Configure service type of the local
user as well as other attributes
service-type ppp
[ callback-nocheck |
callback-number
callback-number | call-number
call-number [ :subcall-number ] ]
Required
Quit to system view quit —
Create an ISP domain or enter an
existing ISP domain view
domain isp-name Optional
Configure to authenticate domain
users locally
authentication ppp local Optional
For more information about local user and domain configuration, see AAA in the Security Configuration
Guide.
Configuring the authenticatee
Follow these steps to configure the authenticatee:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface view
interface interface-type
interface-number
—
Configure the PAP username and
password sent by the local device
to the peer when the local device is
authenticated by the peer using
PAP
ppp pap local-user username
password { cipher | simple }
password
Required
By default, when being authenticated
by the peer using PAP, the local
device sends null username and
password to the peer.