H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 14)

5-4
To do… Use the command… Remarks
Configure the
description of the current
VLAN
description text
Optional
VLAN interface name is used by default, for example,
Vlan-interface1 Interface.
Bring up the VLAN
interface
undo shutdown
Optional
By default, a VLAN interface is in the up state. In this case,
the VLAN interface is up so long as one port in the VLAN is
up and goes down if all ports in the VLAN go down.
An administratively shut down VLAN interface however
will be in the down state until you bring it up, regardless of
how the state of the ports in the VLAN changes.
Configuring WLAN Service
WLAN service configuration includes enabling WLAN service, WLAN global configuration, country code,
service template, AP, radio configuration, and interface configuration.
Follow these steps to configure WLAN service:
To do… Use the command… Remarks
Enter system view system-view —
Enable WLAN service
Enable WLAN service wlan enable
Required
By default, WLAN service is enabled.
All WLAN services are available only if WLAN
service is enabled.
Specifies a country code
Specifies a country code wlan country-code code
Required
By default, the country code value is CN.
For more information about country code and
country, see WLAN Service in the WLAN
Command Reference in the H3C WX Series
Access Controllers Command References.
z The country code determines
characteristics such as the power level
and total number of channels. You must
set the correct country code or area code
before configuring an AP.
z If you change the country code for an AP
that has a radio card not supported by the
new country code, the corresponding
WLAN-radio interface will have its
configurations of the service template,
maximum power, and channels removed
automatically.
Configuring a Service Template
Create a WLAN-ESS
interface interface wlan-ess
interface-index
Required
If the WLAN-ESS interface identified by the
interface-number argument does not exist,
this command creates the WLAN-ESS
interface first.