H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 56)

49
Traffic redirecting configuration
This chapter includes these sections:
• Traffic redirecting overview
• Configuring traffic redirecting
NOTE:
•
The term "switch" or "device" in this chapter refers to the switching engine on a WX3000E
wired-wireless switch.
• The WX3000E series comprises WX3024E and WX3010E wired-wireless switches.
• The port numbers in this chapter are for illustration only.
Traffic redirecting overview
Traffic redirecting is the action of redirecting the packets matching the specific match criteria to a certain
location for processing.
The switching engine on a WX3000E wired-wireless switch supports redirecting traffic to an interface.
When the switch receives packets to be processed by a specific interface, you can configure redirecting
traffic to the interface. Traffic redirecting applies to only Layer 2 packets.
Configuring traffic redirecting
Follow these steps to configure traffic redirecting:
To do… Use the command… Remarks
Enter system view system-view —
Create a class and enter class view
traffic classifier tcl-name [ operator
{ and | or } ]
—
Configure match criteria if-match match-criteria —
Return to system view quit —
Create a behavior and enter behavior
view
traffic behavior behavior-name Required
Configure a traffic redirecting action
redirect interface interface-type
interface-number
Optional
You can specify the traffic
redirecting destination as
needed.
Return to system view quit —
Create a policy and enter policy view qos policy policy-name —
Associate the class with the traffic
behavior in the QoS policy classifier tcl-name behavior
behavior-name
—