Configuration procedure, Figure 15 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 54

Figure 15 Network diagram for priority marking configuration

Configuration procedure

# Create advanced ACL 3000, and configure a rule to match packets with destination IP address

192.168.0.1.

system-view

[Device] acl number 3000

[Device-acl-adv-3000] rule permit ip destination 192.168.0.1 0

[Device-acl-adv-3000] quit

# Create advanced ACL 3001, and configure a rule to match packets with destination IP address
192.168.0.2.

[Device] acl number 3001

[Device-acl-adv-3001] rule permit ip destination 192.168.0.2 0

[Device-acl-adv-3001] quit

# Create advanced ACL 3002, and configure a rule to match packets with destination IP address

192.168.0.3.

[Device] acl number 3002

[Device-acl-adv-3002] rule permit ip destination 192.168.0.3 0

[Device-acl-adv-3002] quit

# Create a class named classifier_dbserver, and use ACL 3000 as the match criterion in the class.

[Device] traffic classifier classifier_dbserver

[Device-classifier-classifier_dbserver] if-match acl 3000

[Device-classifier-classifier_dbserver] quit

# Create a class named classifier_mserver, and use ACL 3001 as the match criterion in the class.

[Device] traffic classifier classifier_mserver

[Device-classifier-classifier_mserver] if-match acl 3001

[Device-classifier-classifier_mserver] quit

# Create a class named classifier_fserver, and use ACL 3002 as the match criterion in the class.

[Device] traffic classifier classifier_fserver

[Device-classifier-classifier_fserver] if-match acl 3002

[Device-classifier-classifier_fserver] quit

# Create a behavior named behavior_dbserver, and configure the action of setting the local precedence
value to 4.

[Device] traffic behavior behavior_dbserver