H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 46)

39
To do… Use the command… Remarks
Enter system view system-view —
Enter interface
view or port
group view
Enter interface
view interface interface-type
interface-number Use either command.
Settings in interface view take effect on the
current interface. Settings in port group view
take effect on all ports in the port group.
Enter port group
view port-group manual
port-group-name
Configure SP queuing undo qos wrr
Required
By default, an interface uses the SP queuing.
Configuration example
1. Network requirements
Configure GigabitEthernet 1/0/1 to use SP queuing.
2. Configuration procedure
# Enter system view
system-view
# Configure GigabitEthernet1/0/1 to use SP queuing.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] undo qos wrr
Configure WRR queuing
Configuration procedure
1. Configuring WRR queuing
Follow these steps to configure basic WRR queuing:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface
view or port
group view
Enter interface
view interface interface-type
interface-number Use either command.
Settings in interface view take effect
on the current interface. Settings in
port group view take effect on all
ports in the port group.
Enter port group
view port-group manual
port-group-name
Configure a basic WRR queue
qos wrr queue-id group group-id
weight schedule-value
Required
By default, an interface uses the SP
queuing.
Display WRR queuing configuration
information on interfaces
display qos wrr interface
[ interface-type
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
Optional
Available in any view