H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 32)

25
Priority mapping configuration examples
Priority mapping table configuration example
Network requirements
As shown in Figure 7 , the enterprise network of a company interconnects all departments through Device.
The network is described as follows:
• The marketing department connects to GigabitEthernet 1/0/1 of Device, which sets the 802.1p
priority of traffic from the marketing department to 3.
• The R&D department connects to GigabitEthernet 1/0/2 of Device, which sets the 802.1p priority
of traffic from the R&D department to 4.
• The management department connects to GigabitEthernet 1/0/3 of Device, which sets the 802.1p
priority of traffic from the management department to 5.
Configure port priority and 802.1p-to-local mapping table to implement the plan as described in Table
2 .
Table 2 Configuration plan
Traffic
destination Traffic priority order
Queuing plan
Traffic source
Output queue Queue priority
Public
servers
R&D department >
management
department >
marketing department
R&D department 6 High
Management
department
4 Medium
Marketing department 2 Low