beautypg.com

Msr 930-sa, Led description – H3C Technologies H3C MSR 930 User Manual

Page 40

background image

33

MSR 930-SA

Figure 42 Front panel LEDs

(1) System status LED (SYS)

(2) Network status LED (INTERNET)

(3) VPN status LED (VPN)

Figure 43 Rear panel LEDs

(1) GE port status LED (yellow)

(2) GE port status LED (green)

(3) Serial port data receiving status LED (ACT)

(4) Serial port link status LED (LINK)

LED description

LED Location

Status

Description

SYS Front

panel

Off

No power input, or exceptions have occurred.

Steady green

The SDRAM is performing self-test.

Flashing green (8 Hz)

The system software image is being copied and
decompressed.

Flashing green (1 Hz)

Comware has started with the configuration file and
the router has booted up.

Flashing yellow (1 Hz) The SDRAM has failed the self-test.

Flashing yellow (8 Hz) The extended segment does not exist.

Steady yellow

The system software image does not exist.

INTERNET Front

panel

Off

The router has not been connected to the network.

Steady on

The router has been connected to the network.

VPN Front

panel

Off

A VPN link is present.

Steady on

No VPN link is present.