H3C Technologies H3C MSR 930 - Manual (Page 16)

9
4. Cover the joint with the insulation covering, and heat the insulation covering with a blow dryer
to completely cover the metal part.
Figure 4 Attaching the ring terminal
Grounding the router with a grounding strip
1. Remove the grounding screw from the router chassis.
2. Put the ring terminal of the grounding cable on the grounding screw.
3. Use a screwdriver to fasten the grounding screw.
4. Attach the other end of the grounding cable to the grounding strip.
Figure 5 Connecting the grounding cable to the router