H3C Technologies H3C SR6600-X - Manual (Page 38)

30
(3) SFP+ port LED (LINK/ACT) (4) SFP+ port
LEDs
Table 31 SFP+ port LED description
Status Description
Off No link is present.
Steady green A link is present but no data is being transmitted or received.
Flashing green A link is present and data is being transmitted and received.
Steady yellow The transceiver module has failed to be detected.
Interface specifications
Table 32 SFP+ port specifications
Item Specification
Transceiver module
type
SFP+
Connector type LC
Number of
interfaces
2
Supported physical
layer type
• LAN PHY—10GBASE-R
• WAN PHY—10GBASE-W
Interface rate
• LAN PHY—10.3125 Gbps
• WAN PHY—9.95328 Gbps
Optical
transmit
power
Type Short-distance, multi-mode
Medium-distance,
single-mode
Long-distance, single-mode
Min. –7.3 dBm –8.2 dBm –1 dBm
Max. –1.08 dBm 0.5 dBm 2 dBm
Receiving sensitivity –7.5 dBm –10.3 dBm –11.3 dBm
Central wavelength 850 nm 1310 nm 1550 nm
Max transmission
distance
300 m (984.25 ft) 10 km (6.21 miles) 40 km (24.86 miles)
Fiber type 62.5/125 μm multi-mode 9/125 μm single-mode 9/125 μm single-mode
Interface cables
Use an SFP+ transceiver module and an optical fiber that has an LC connector to connect the SFP+ port
on the HIM-2EXP interface module.
For the appearance and connection of the interface cables, see "
Connecting an optical interface cable ."