H3C Technologies H3C SR6600-X - Manual (Page 29)

21
Item Specification
Max. transmission distance 2 km (1.24 miles)
15 km (9.32
miles) 40 km (24.86
miles) 80 km (49.71
miles)
Fiber type
9/125 μm
single-mode 9/125 μm
single-mode 9/125 μm
single-mode 9/125 μm
single-mode
Interface cables
Test optical power before choosing a transceiver module and optical fiber, because an optical fiber
connector might have transmitted for dozens of kilometers from a user fiber.
The HIM-RS2P supports the connection of Mate interfaces within the module. All Mate interfaces in a
module can be connected without external transceiver modules or fibers.
For the appearance and connection of a HIM-RS2P interface cable, see "
Connecting an optical interface
cable ."
HIM-4G4P (RT-HIM-4G4P-H3)
The HIM-4G4P provides 4 Packet Over SDH/SONET (POS) interfaces and four 1000 Mbps Ethernet
fiber ports. A POS interface transmits data at STM-1/OC-3 (155.52Mbps). The HIM-4G4P is half the
height of a HIM, and occupies one slot on a FIP.
Front panel
Figure 17 Front panel
(1) Captive screw (2) SFP port
(3) Ejector lever (4) SFP port carrier signal LED (LINK/ACT)
LEDs
Table 21 LED description
LED Status Description
SFP
GE-1000Base-
X
LINK/ACT (0 to
3)
(Green)
Off No link is present.
On A 1000 Mbps link is present.
Flashing
Data is being transmitted or received at 1000
Mbps.
SFP POS-155M LINK/ACT/LP/ Steady green A 155.52 Mbps link is present.