H3C Technologies H3C S6300 Series Switches User Manual

Page 26

[RB6-Ten-GigabitEthernet1/0/3] quit

[RB6] interface ten-gigabitethernet 1/0/4

[RB6-Ten-GigabitEthernet1/0/4] trill enable

[RB6-Ten-GigabitEthernet1/0/4] trill link-type trunk

[RB6-Ten-GigabitEthernet1/0/4] quit

[RB6] interface ten-gigabitethernet 1/0/5

[RB6-Ten-GigabitEthernet1/0/5] trill enable

[RB6-Ten-GigabitEthernet1/0/5] trill link-type trunk

[RB6-Ten-GigabitEthernet1/0/5] quit

# Configure RB 7 through RB 9 in the same way RB 6 is configured. (Details not shown.)

Configure the uplink ports of the distribution layer devices:
# Enable TRILL on uplink ports Ten-GigabitEthernet 1/0/6 and Ten-GigabitEthernet 1/0/7 of RB
6.

[RB6] interface ten-gigabitethernet 1/0/6

[RB6-Ten-GigabitEthernet1/0/6] trill enable

[RB6-Ten-GigabitEthernet1/0/6] quit

[RB6] interface ten-gigabitethernet 1/0/7

[RB6-Ten-GigabitEthernet1/0/7] trill enable

[RB6-Ten-GigabitEthernet1/0/7] quit

# Configure RB 7 through RB 9 in the same way RB 6 is configured. (Details not shown.)

Configure TRILL distribution trees:
# Set the RB 6's priority to 65535, and set the number of TRILL distribution trees that the RB wants
all RBs to compute to 4.

[RB6] trill

[RB6-trill] tree-root priority 65535

[RB6-trill] trees calculate 4

[RB6-trill] quit

# Set the RB 7's priority to 65534, and set the number of TRILL distribution trees that the RB wants
all RBs to compute to 4.

[RB7] trill

[RB7-trill] tree-root priority 65534

[RB7-trill] trees calculate 4

[RB7-trill] quit

# Set the RB 8's priority to 65533, and set the number of TRILL distribution trees that the RB wants

all RBs to compute to 4.

[RB8] trill

[RB8-trill] tree-root priority 65533

[RB8-trill] trees calculate 4

[RB8-trill] quit

# Set the RB 9's priority to 65532, and set the number of TRILL distribution trees that the RB wants
all RBs to compute to 4.

[RB9] trill

[RB9-trill] tree-root priority 65532

[RB9-trill] trees calculate 4

[RB9-trill] quit