beautypg.com

Configuring trill gr, Displaying and maintaining trill – H3C Technologies H3C S6300 Series Switches User Manual

Page 23

background image

16

Configuring TRILL GR

Graceful Restart (GR) ensures the continuity of packet forwarding when a protocol restarts or an
active/standby switchover occurs. The device on which a protocol restarts or an active/standby

switchover occurs advertises the restart status to the neighbors, and allows the neighbors to re-establish

connections. GR involves the following roles:

GR restarter—Graceful restarting router. It must be GR capable.

GR helper—A neighbor of the GR restarter. It helps the GR restarter to complete the GR process.

To configure TRILL GR:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter TRILL view.

trill N/A

3.

Enable GR for TRILL.

graceful-restart

By default, GR is disabled for TRILL.

4.

(Optional.) Configure

the GR interval for TRILL.

graceful-restart interval
interval

The default setting is 300 seconds.

Displaying and maintaining TRILL

Execute the display commands in any view and the reset command in user view.

Task Command

Display TRILL ardency table
information.

display trill adjacent-table [ count | nickname nickname interface
interface-type interface-number ]

Display brief TRILL information.

display trill brief

Display TRILL FIB information. display trill fib [ count | nickname nickname ]

Display TRILL GR status.

display trill graceful-restart status

Display TRILL port information.

display trill interface [ interface-type interface-number ]

Display TRILL LSDB information.

display trill lsdb [ local | lsp-id lsp-id | verbose ] *

Display all ingress entries in the TRILL
multicast FIB (MFIB).

display trill mfib ingress [ vlan vlan-id [ local-entry | remote-entry ] ]

Display all egress entries in the TRILL
MFIB.

display trill mfib transit [ nickname nickname [ prune-entry | rpf-entry
| vlan vlan-id [ mac-address mac-address ] ] ]

Display information about the TRILL
multicast routing table.

display trill multicast-route [ tree-root nickname [ vlan vlan-list [ mac
mac-address ] ] ]

Display the TRILL neighbor table.

display trill neighbor-table

Display the TRILL neighbor statistics. display trill peer [ interface interface-type interface-number ]

Display the TRILL RPF check table
information.

display trill rpf-table tree-root nickname

Display information about the TRILL
unicast routing table.

display trill unicast-route [ nickname nickname ] [ verbose ]