H3C Technologies H3C S6300 Series Switches User Manual

Page 25

Configure the downlink ports of access layer devices:
# Enable TRILL globally on RB 1, and enable TRILL on downlink port Ten-GigabitEthernet 1/0/1 of
RB 1.

system-view

[RB1] trill

[RB1-trill] quit

[RB1] interface ten-gigabitethernet 1/0/1

[RB1-Ten-GigabitEthernet1/0/1] trill enable

[RB1-Ten-GigabitEthernet1/0/1] quit

# Configure RB 2 through RB 5 in the way RB 1 is configured. (Details not shown.)

Configure the uplink port of access layer devices:
# Enable TRILL on uplink port Ten-GigabitEthernet 1/0/2 through Ten-GigabitEthernet 1/0/5 of
RB 1, and configure these ports as trunk ports.

[RB1] interface ten-gigabitethernet 1/0/2

[RB1-Ten-GigabitEthernet1/0/2] trill enable

[RB1-Ten-GigabitEthernet1/0/2] trill link-type trunk

[RB1-Ten-GigabitEthernet1/0/2] quit

[RB1] interface ten-gigabitethernet 1/0/3

[RB1-Ten-GigabitEthernet1/0/3] trill enable

[RB1-Ten-GigabitEthernet1/0/3] trill link-type trunk

[RB1-Ten-GigabitEthernet1/0/3] quit

[RB1] interface ten-gigabitethernet 1/0/4

[RB1-Ten-GigabitEthernet1/0/4] trill enable

[RB1-Ten-GigabitEthernet1/0/4] trill link-type trunk

[RB1-Ten-GigabitEthernet1/0/4] quit

[RB1] interface ten-gigabitethernet 1/0/5

[RB1-Ten-GigabitEthernet1/0/5] trill enable

[RB1-Ten-GigabitEthernet1/0/5] trill link-type trunk

[RB1-Ten-GigabitEthernet1/0/5] quit

# Configure RB 2 through RB 5 in the same way RB 1 is configured. (Details not shown.)

Configure the downlink ports of distribution layer devices:
# Enable TRILL globally on RB 6, enable TRILL on downlink port Ten-GigabitEthernet 1/0/1
through Ten-GigabitEthernet 1/0/5 of RB 6, and configure these ports as trunk ports.

system-view

[RB6] trill

[RB6-trill] quit

[RB6] interface ten-gigabitethernet 1/0/1

[RB6-Ten-GigabitEthernet1/0/1] trill enable

[RB6-Ten-GigabitEthernet1/0/1] trill link-type trunk

[RB6-Ten-GigabitEthernet1/0/1] quit

[RB6] interface ten-gigabitethernet 1/0/2

[RB6-Ten-GigabitEthernet1/0/2] trill enable

[RB6-Ten-GigabitEthernet1/0/2] trill link-type trunk

[RB6-Ten-GigabitEthernet1/0/2] quit

[RB6] interface ten-gigabitethernet 1/0/3

[RB6-Ten-GigabitEthernet1/0/3] trill enable

[RB6-Ten-GigabitEthernet1/0/3] trill link-type trunk