H3C Technologies H3C S9500E Series Switches - Manual (Page 125)

115
Combo interface LED
The following LPUs provide combo interfaces. Each copper or fiber combo interface has a LED.
• LSR2GT24LEB1
• LSR1GT24LEC1
• LSR2GP24LEB1
• LSR1GP24LEC1
Table 49 Combo interface LED description
LED Status Description
LINK/ACT
(orange-green)
Steady orange
The combo interface is activated. By default, the copper
combo interface is activated.
Off The combo interface is not activated.
Steady green A link is present.
Off No link is present.
Flashing green
Data is being transmitted and/or received on the combo
interface.
Base card LED
Table 50 Base card LED description
LED Status Description
RUN (green)
Steady on The card is faulty.
Off The card is faulty or not in position.
Flashing The card is operating properly.
Fast flashing
The LED flashes fast when the card is starting up. If the LED
keeps flashing fast, it indicates that the card is not
successfully registered.
NOTE:
The description of the base card LED on the LSR1LN1BNL1 and LSR1LN2BNL1 is the same.
Subcard LEDs
LSR1DRUP1L1
Table 51 LED description
LED Status Description
MATESYNC Steady on
The local Mate interface is synchronous with the peer Mate
interface.