H3C Technologies H3C S9500E Series Switches - Manual (Page 122)

112
MPU LEDs
Figure 69 MPU LEDs
(1) CF card status LED (CFS) (2) Network management
interface LED (ACT) (3) Network management interface
LED (LINK)
(4) MPU status LED (SFS) (5) MPU status LED (ACT) (6) MPU status LED (RUN)
(7) MPU status LED (ALM) (8) LPU status LED (RUN) (9) LPU status LED (ALM)
NOTE:
The appearance of S9500E MPUs varies by MPU model. Figure 69 takes LSR1SRP2C1 for illustration.
CF card status LED
Table 43 CF card status LED description
LED Status Description
CFS (green)
Steady on The CF card is in position and idle.
Flashing
The CF card is in position and performing read/write
operations. Do not unplug it.
Off
The CF card is out of position or offline. You can plug in or
unplug it.
NOTE:
When the CF card LED is on, do not unplug the CF card. To unplug it, execute the umount command in
user view to uninstall the CF card, and then unplug the CF card when the CF card LED is off.
Network management port LEDs
Table 44 Network management port LED description
LED Status Description
LINK Off No link is present.