Elation Professional Design Spot 300 PRO - Manual (Page 21)

Design Spot 300 Pro™
©Elation Professional, Los Angeles Ca. 21 www.ElationLighting.com
8. FIXTURE MENU
On-Board System Menu: The Design Spot 300 Pro™ comes with an easy to navigate
system menu. This next section will detail the functions of each command in the system
menu.
LED Control Panel: The control panel located on the base of the fixture allows you to
access the main menu and make all necessary adjustments to the Design Spot 300 Pro™.
During normal operation, tapping the “MODE/ESC” key once will access the fixture’s main
menu. Once in the main menu you can navigate through the different functions and access
the sub-menus with the Up and Down buttons. Once you reach a field that requires
adjusting, tap the ENTER button to activate that field and use the UP and Down button to
adjust the field. Tapping the Enter button once more will confirm your setting. Once a setting
is saved the display will briefly readout OK to confirm a new setting has been made and
locked into memory. You may exit the main menu at any time without making any
adjustments by tapping the MODE/ESC button.
MODE/ESC Button - To access the main menu locate the MODE/ESC button on the front of
the unit. Press this button to activate the system menu. Tap the UP button until you reach
the function you wish to change. When you reach the function you wish to change tap the
ENTER button once to select that menu function. When a function is selected use the UP or
DOWN button to change the function. Once your changes are made tap the ENTER button
yet again to lock the change in the system menu. To exit without making any changes tap
the MODE/ESC button.
Default settings shaded.
F
u
n
ct
ion
M
o
d
e
Set DMX Address
Value Display
Set To Slave
Auto Program
Music Control A001~AXXX
PAN……
Slave1,Slave2,Slave3
Master / Alone
Master / Alone DMX address setting
DMX value display
Slave setting
Auto program
Music control