Elation Professional Design Spot 300 PRO - Manual (Page 16)

Design Spot 300 Pro™
©Elation Professional, Los Angeles Ca. 16 www.ElationLighting.com
one unit (see the illustration below). When mounting this fixture to truss be sure to secure an
appropriately rated clamp to the included omega bracket using a M10 screw fitted through
the center hole of the “omega bracket”. As an added safety measure be sure to attached at
least one properly rated safety cable to the fixture using on of the safety cable rigging point
integrated in the base assembly
Securing the Design Spot 300 Pro™
Regardless of the rigging option you choose for your DESIGN SPOT 300 Pro™ always be
sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for
a safety cable on the hanging bracket as illustrated above. Be sure to only use the
designated rigging point for the safety cable and never secure a safety cable to a carrying
handle.