H3C Technologies H3C S12500 Series Switches - Manual (Page 34)

27
[Site4-Tunnel101] quit
# Configure the network management EVI network.
[Site4] interface tunnel 102 mode evi
[Site4-Tunnel102] source 172.16.4.1
[Site4-Tunnel102] evi network-id 2
[Site4-Tunnel102] evi-isis extend-vlan 4000
[Site4-Tunnel102] evi neighbor-discovery server enable
[Site4-Tunnel102] quit
# Configure the Web service EVI network.
[Site4] interface tunnel 103 mode evi
[Site4-Tunnel103] source 172.16.4.1
[Site4-Tunnel103] evi network-id 3
[Site4-Tunnel103] evi-isis extend-vlan 50 to 80
[Site4-Tunnel103] evi neighbor-discovery server enable
[Site4-Tunnel103] quit
# Enable EVI on GigabitEthernet 3/0/1.
[Site4] interface gigabitethernet 3/0/1
[Site4-GigabitEthernet3/0/1] evi enable
[Site4-GigabitEthernet3/0/1] quit
2. Configure site 1:
# Configure the EVI tunnel source interface for all EVI tunnels (VLAN-interface 10 in this example),
and assign the transport-facing physical interface GigabitEthernet 3/0/1 to the VLAN.
system-view
[Site1] vlan 10
[Site1-vlan10] port gigabitethernet 3/0/1
[Site1-vlan10] quit
[Site1] interface vlan-interface 10
[Site1-Vlan-interface10] ip address 172.16.1.1 16
[Site1-Vlan-interface10] quit
# Configure the network management EVI network.
[Site1] interface tunnel 102 mode evi
[Site1-Tunnel102] source 172.16.1.1
[Site1-Tunnel102] evi network-id 2
[Site1-Tunnel102] evi-isis extend-vlan 4000
[Site1-Tunnel102] evi neighbor-discovery client enable 172.16.4.1
[Site1-Tunnel102] quit
# Configure the Web service EVI network.
[Site1] interface tunnel 103 mode evi
[Site1-Tunnel103] source 172.16.1.1
[Site1-Tunnel103] evi network-id 3
[Site1-Tunnel103] evi-isis extend-vlan 50 to 80
[Site1-Tunnel103] evi neighbor-discovery client enable 172.16.4.1
[Site1-Tunnel103] quit
# Enable EVI on GigabitEthernet 3/0/1, the physical interface for the EVI tunnel.
[Site1] interface gigabitethernet 3/0/1
[Site1-GigabitEthernet3/0/1] evi enable
[Site1-GigabitEthernet3/0/1] quit