H3C Technologies H3C S12500 Series Switches - Manual (Page 27)

20
Task Command
Display IPv4 ENDC information. display evi neighbor-discovery client summary
Display IPv4 neighbors that an ENDC
has discovered.
display evi neighbor-discovery client member [ interface tunnel
interface-number | local local-ip | remote client-ip | server
server-ip ]
Display ENDC statistics.
display evi neighbor-discovery client statistics interface tunnel
interface-number
Display EVI-Link interface information for
an EVI tunnel.
display evi link interface tunnel interface-number
Display information about EVI-Link
interfaces. display interface [ evi-link [ interface-number ] ] [ brief
[ description ] ]
Display brief EVI IS-IS process
information.
display evi-isis brief [ process-id ]
Display the MAC address database of
EVI IS-IS. display evi-isis { local | remote } mac-info [ interface tunnel
interface-number [ vlan vlan-id ] [ count ] ]
Display EVI IS-IS link state database. display evi-isis lsdb [ local | lsp-id lspid | verbose ] * [ process-id ]
Display EVI IS-IS neighbors. display evi-isis peer [ process-id ]
Display EVI IS-IS information for a tunnel
interface.
display evi-isis tunnel [ tunnel-number ]
Display EVI IS-IS GR state. display evi-isis graceful-restart status [ process-id ]
Display remote MAC addresses (in
standalone mode).
display evi mac-address interface tunnel interface-number [ vlan
vlan-id ] [ slot slot-number ] [ count ]
display evi mac-address interface tunnel interface-number
mac-address mac-address vlan vlan-id [ slot slot-number ]
Display remote MAC addresses (in IRF
mode).
display evi mac-address interface tunnel interface-number [ vlan
vlan-id ] [ chassis chassis-number slot slot-number ] [ count ]
display evi mac-address interface tunnel interface-number
mac-address mac-address vlan vlan-id [ chassis chassis-number slot
slot-number ]
Display EVI ARP flooding suppression
entries (in standalone mode). display evi arp-suppression interface tunnel interface-number
[ vlan vlan-id ] [ slot slot-number ] [ count ]
Display EVI ARP flooding suppression
entries (in IRF mode). display evi arp-suppression interface tunnel interface-number
[ vlan vlan-id ] [ chassis chassis-number slot slot-number ] [ count ]
Clear data for EVI IS-IS processes. reset evi-isis all [ process-id ]
Clear EVI ARP flooding suppression
entries. reset evi arp-suppression interface tunnel interface-number [ vlan
vlan-id ]
EVI configuration examples
By default, Ethernet interfaces, VLAN interfaces, and aggregate interfaces are down. To configure these
interfaces, use the undo shutdown command to bring them up.