Ensemble Designs 5420 SD Logo Inserter - Manual (Page 9)

GPI Control
An external customer-supplied GPI device can be connected to the rear of the 5420
module to control any of the eight GPI inputs.
Connect the GPI control device to the 5420 Control connector pins as shown below.
Each GPI pushbutton should be wired with closure to ground to trigger a crosspoint.
Model 5420 Digital Logo Inserter
Customer -Supplied
GPI Device Switches
5420 Control
Connector
HDB-15 Male
1
2
3
4
5
6
7
8
15
14
12
11
10
9
8
7
3, 6, 13
Pin 1
Pin 11
Pin 6
Control
Customer-supplied GPI Device to Avenue Frame Pinout
5420-9