Ensemble Designs 5420 SD Logo Inserter - Manual (Page 15)

The Logo menu shown below allows you to select a logo, set up the density (transparen-
cy), select the type of cycling, and horizontal and vertical position of individual logos:
• Number – allows you to select the desired logo number stored in memory.
• Name – displays the name of the selected logo.
• Density – set the amount of transparency of the displayed logo.
• V Pos – set the vertical position of the logo in lines.
• H Pos – set the horizontal position of the logo in pixels.
• Cycle – select the type of cycle desired when an animation is enabled (Off, Loop
or Ping Pong).
The following status display is provided:
• Name – displays the name of the currently selected logo.
• Type – displays the type of logo (Still or Animation).
Note: When you change parameters for a logo with these local controls, you may wish to
note the changes for each logo. As these changes are not reflected back to the original file
stored on the PC, you can then make these changes to the file stored in the project folder
with Avenue Logo. The next time you download the logo it will not need any adjustment.
Model 5420 Digital Logo Inserter
5420-15