Ensemble Designs 5420 SD Logo Inserter - Manual (Page 18)

Model 5420 Digital Logo Inserter
Avenue Touch Screen Remote Configuration
The Avenue Touch Screen remote control status menus for this module are illustrated and
explained below. Refer to the 5420 Parameter Table for a summary of available parame-
ters that can be set remotely through the menus illustrated. For more information on
using Avenue Touch Screen, refer to the Avenue System Overview operating section.
Parameter fields that are grayed out can indicate one of the following conditions:
• An option is not installed.
• The function is not active.
• The module is locked.
• The User Level set with Avenue PC is not accessible from the current User Level.
For information on installing and using the Avenue Logo application for downloading logos
and animations to the module, refer to the Avenue Logo data pack and CD that accompa-
nies the 5420 module.
5420 Avenue Touch Screen Menus
The Control menu screen shown below allows you to select an event defined in the Event
menu as the next transition.
• Cut – select to cut the selected event on or off.
• Mix – select to mix the selected event on or off.
• Event Select – select a defined event to be triggered by the corresponding GPI
input.
The following status display is provided:
• Status – shows the selected event status (Key Off and Key On).
5420-18