Ensemble Designs 5420 SD Logo Inserter - Manual (Page 3)

Model 5420 Digital Logo Inserter
When the module is configured for Fill/Key mode, black is added to the fill instead of the
background signal and the timing reference is selectable from the external video reference
BNC, the master frame reference or the serial input. The separate Fill and Key signals go
to their respective output BNCs for feeding a device such as a switcher. When an image is
selected as a key, it is directly transferred to the linear keying circuit.
The on-board CPU can monitor and report module ID information (slot location, software
version and board revision), and power status to the optional frame System Control
module. This information can be accessed by the user or set to register an alarm if desired
using the remote control options available.
Because the 5420 is an Avenue module, every function and parameter can be controlled
from an Avenue Touch Screen Control Panel, Avenue Express Panel, or the Avenue PC
Control Application. Memory registers can be used to save the complete configuration of
the module, making it easy to change instantly between different configurations.
5420-3
Bkgd
Input
Ext Ref
Master
Ref
Linear
Keyer
Timing
and
Memory
Control
Flash
Memory
Sync Detector
Avenue Control
System
Pgm/Fill
Pvw/Key
Image Transfer
Fill
Key
Microprocessor
Loop Back
Output
5420 Digital Logo Inserter Block Diagram