Ensemble Designs 5420 SD Logo Inserter - Manual (Page 21)

The Config menu shown below allows you to configure the mode, the GPI 8 control action,
and the reference input for the module:
• Mode – select either DSK, DSK w/Preview, or Fill/Key mode for the module.
• GPI 8/Event 8 – select the action for the GPI 8 control as fire Event 8, or Mix or
Cut the selected Event 1 – 7, On, or Off.
• Ref Select – choose a reference source from Digital In, External, or Master
when Fill/Key mode is selected.
The following status displays are also provided:
• Input Status – displays the status of the serial digital input signal as No Input
and Input OK.
• EDH Status – displays the EDH status of the digital input signal (No Input, No
EDH, EDH OK, or EDH Error).
• Reference – displays the selected reference when in Fill/Key mode (525, 625 or
No Ref).
Model 5420 Digital Logo Inserter
5420-21