Eneo HDR-5004AH1.0 User Manual
Page 41
CH 3 How to Use
4) Event In
With this menu, you can set sensor input, motion detection setup. You can also set
each channel individually. Each channel may be configured to M (Motion) / S
(Sensor) / V (Both)
* Summary regarding as Event Recording
Event Input
Motion
Detection
Sensor Setting
MD
di
MD recording
MD
ON
OFF
Sensor detection and
recording
Sensor
OFF
ON
MD,Sensor detection
and
Recording
MD/Sensor
ON
ON
MD,Sensor
*In REC Menu, MD recording, Sensor detection recording, MD, Sensor detection
recording and no recording are determined according to Event Input.
*Although you set Motion Detection and Sensor Setting to On in Event menu, if
Detection and non-
recording
None
ON
ON
Event Input in Rec Menu is set to None, it only detects and does not record.
All event
Sensor only
Sensor only
Motion only
POS only
41